2024 Salsa Rustler SLX

Salsa
Availability:
Most in stock items ship within 1-3 business days
$3,699.00
(No reviews yet)
Weight:
45.00 LBS
Width:
58.00 (in)
Height:
10.00 (in)
Depth:
32.00 (in)
Current Stock:
Adding to cart… The item has been added

Rustler SLX is designed from the ground up to be a playful trail bike. An aluminum frame, responsive trail geometry, and the agility of 27.5" wheels mean you can get creative with the trail features. Rustlers Split Pivot suspension design makes the most of its 130 mm of rear travel and is active while accelerating, braking, and climbing for reliable traction. Shimanos SLX drivetrain performs smoothly ride after ride, and the four-piston hydraulic brakes bring the action to a halt when you need it. With space for a full-size water bottle and a top tube mount for ride accessories, its easier to keep the fun rolling.

Split Pivot Suspension System

Ride up and downhill efficiently. Our suspension system isolates pedaling forces from braking forces, so we can tune for both independently.

On-Bike Storage

Carry more on your bike and less on your body. Our frames and forks feature mounts for extra bottles, camping gear, and ride accessories.

Frame Protection

Worry less about bike damage. Our frames and forks are designed and built to hold up to the rugged adventures you put them through.

SPLIT PIVOT® REAR SUSPENSION SYSTEM

Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction

PROGRESSIVE LEVERAGE RATE

The leverage rate is progressive and offers plenty of bottom out performance at the end of the stroke, promoting more confidence and control on bigger hits and a deeper feel to the travel. The beginning and mid-stroke remain relatively unchanged, providing extremely supple small bump compliance off the top for a smooth ride and consistent mid-travel support to help combat rider fatigue and maintain bike geometry. A slightly lower overall rate yields lower shock pressures making for easier and quicker initial setup

CONSISTENT BRAKING TRACTION

The Split Pivot® suspension design allows us to isolate braking forces from the rest of the system. Braking effect on suspension is minimal and consistent throughout the suspension travel

EFFICIENT PEDALING

Our anti-squat design leads to better pedaling performance. This is partly the result of designing the bike to be 1x specific and optimized around a 32-tooth chainring. The riding result is incredibly efficient pedaling without the need to over dampen the rear shock (thereby hindering small bump compliance) or necessitating the use of a lockout

METRIC SHOCK STANDARD

This shock standard brings a host of benefits: Increased stiffness in rear triangle/rear suspension frame members / Able to be fine-tuned for improved ride quality and personal preference

FLIP CHIP

Integrated into the shock link mount, the Flip Chip allows simple, quick adjustments to bottom bracket height/headtube angle to account for wheel size, tire diameter, terrain, or rider preference

6066-T6 ALUMINUM TUBESET

Top-shelf, double and triple-butted, heat-treated 6066-T6 aluminum tubing is used throughout the frame. This 6000-series aluminum has better strength and fatigue characteristics than 6061 and 7000-series aluminums, allowing for a stronger and lighter overall frame. Additionally, the tubing is strategically shaped and formed for additional stiffness and strength optimization in key stress areas

RUSTLER GEOMETRY

Rustler is designed to be a playful, responsive trail bike. It features nimble but capable geometry. The sub-66-degree head tube angle provides stability and confidence at speed but retains low-speed handling and keeps overall wheelbase in check. 425 mm chainstays and dedicated 27.5" wheels make Rustler the liveliest full-suspension bike in our lineup. The compact suspension layout and low top tube facilitate on-trail body language and provide stellar standover clearance on all sizes. The flip chip can be used to adjust head tube angle and bottom bracket height based on tire size, terrain, or personal preference

MODERN TRAIL BIKE FIT

Rustler is designed for a modern trail bike fit. This means a short stem, wide bar, and longer effective top tube are used to place the rider in the same position they are familiar with on their older trail bike. This results in a more precise steering motion due to the shorter stem, a lot of front wheel control with the wide bar, and plenty of front-center length and cockpit room for fore-aft body movement when things get rowdy. Weve also done our best to provide a low top tube for on-trail body language shifts. Each frame size is designed around a 50 mm stem and wide bar. To maintain the correct hand position relative to the pedals and saddle, Rustler has a longer horizontal top tube. No need to size up when selecting a frame size with the intent of running 40 to 60 mm stems. We built it in for you

TOP TUBE ACCESSORY MOUNTS

Bolt on your Salsa EXP Series Top Tube Bag for a secure connection and elimination of strap wear

ACCOMMODATES FULL-SIZE BOTTLE

All Rustler sizes accept a full-sized (26 oz) water bottle within the front triangle

FULL-LENGTH INTERNAL HOUSING CABLE ROUTING

Full-length housing improves shifting performance in poor conditions and increases use time between maintenance intervals

DROPPER POST STEALTH ROUTING COMPATIBLE

Compatible with 30.9mm dropper seatposts for true trail bike performance.

MOLDED FRAME PROTECTION

Protects your investment from impacts.

Click for Geometry

Click for Owners Manual

Click for Universal Framesheet

Click for ASTM Chart

Click for Main Pivot Instructions

Click for Axle Pivot Hanger Instructions

Frame (Frameset):
Rustler Alloy V1
Fork (Frameset):
RockShox Yari RC, 150 mm, 37 mm offset
Color (Frameset):
Orange
Rear Shock (Frameset):
Fox Float DPS Performance
Rear Derailleur (Drivetrain):
Shimano SLX M7100 SGS
Cassette (Drivetrain):
Shimano Deore M6100, 10-51t, 12-speed
Chain (Drivetrain):
Shimano Deore M6100
Crankset (Drivetrain):
Shimano Deore M6100, 32t
Shifter (Drivetrain):
Shimano Deore M6100
Brakes and Rotors (Drivetrain):
Shimano Deore M6120 four-piston, Shimano RT64 (Center Lock, 180 mm)
Headset (Components):
FSA Orbit IS-2 ACB, IS41/IS52
Stem (Components):
Salsa Guide Trail 50 mm
Handlebar (Components):
Race Face Chester 35
Grips/Bar Tape (Components):
Salsa File Tread Lock-on
Seatpost (Components):
TranzX YSI05, Shimano MT500 lever, 30 mm travel adjust (XS/SM 125 x409 mm, MD 150 x 459 mm, LG 170 x 499 mm, XL 200 x 559 mm)
Saddle (Components):
WTB Volt 250 Steel, 250 x 135 mm
Front Wheel (Wheels):
Shimano MT400-B 15 x 110 mm hub, WTB ST i35 27.5" rim
Rear Wheel (Wheels):
Shimano SLX M7110 12 x 148 mm hub, WTB ST i35 27.5" rim
Tires (Wheels):
Maxxis DHF 27.5 x 2.6" front, Maxxis DHR II 27.5 x 2.6" rear, EXO, TR
Complete Bike Weight (Weight):
34 lbs for Medium
Fork Offset:
37-46mm
Seatpost:
ø30.9mm
Seat Collar:
Carbon: 35.4mm, Aluminum: 35.0mm
Bottom Bracket:
73mm BSA w/ ISCG-05 Mounts (Carbon frames feature removable ISCG-05 bracket)
Crankset (Max Ring):
Boost-148 - 52mm chainline only 1x: 32t max
Rear Brake (Rotor):
Post mount 180mm, (ø200mm max)
Rear Spacing:
148 x 12mm thru-axle
Derailleur Hanger:
FS2322
Accessory Mounts:
Top tube bag mounts
Suspension Fork Length (Travel):
522-542mm (130-150mm)
Shock Mount, Fore:
ø8 x 40mm (bearing mount possible)
Shock Mount, Aft:
ø8 x 12.5mm (included)
Bearings:
17287 (qty 4), 6801 (qty 6)
Headset, Upper:
IS41
Headset, Lower:
IS52
Dropper Compatible (Routing):
Yes, internal/stealth
Rear Axle Size:
ø12 x 188mm, TP = 1.75, TL = 20
Bottle Mounts:
1
Maximum Wheel/Tire Diameter**:
727mm (28.6")
Minimum Wheel/Tire Diameter***:
684mm (26.9")
Tire Size Range for 622/700c/29 Wheels*:
Not Compatible"
Tire Size Range for 584/650b/27.5 Wheels*:
58-71mm (2.3-2.8"")*"
Tire Size Range for 559/26 Wheels*:
Not Compatible"
Rear Shock:
210 x 50mm
Pivot Kit:
Refer to Suspension Frame Service Instructions