2024 Salsa Spearfish Carbon SLX
SalsaSpearfish C SLX is a carbon XC 29er that hits a sweet spot between race-day performance and weekday fun. The carbon frame keeps things light and stiff, while the progressive XC geometry makes descending a blast and climbing a breeze. The Fox Float DPS Performance shock brings 100 mm of travel to our Split Pivot suspension design for efficient pedaling, predictable braking, and unshakeable traction. The RockShox SID Select+ fork delivers 120 mm of travel up front to help handle rock gardens and roots. With on-bike cargo features such as two-bottle capacity and top tube mounts, Spearfish keeps all your ride essentials at hand so you can focus on the trail ahead, not fumbling with a pack. Shimanos trusted SLX 1 x 12 drivetrain shifts smoothly through its wide gear range, so you wont be thrown off your rhythm by a bad shift.
Split Pivot Suspension System
Ride up and downhill efficiently. Our suspension system isolates pedaling forces from braking forces, so we can tune for both independently.
On-Bike Storage
Carry more on your bike and less on your body. Our frames and forks feature mounts for extra bottles, camping gear, and ride accessories.
Frame Protection
Worry less about bike damage. Our frames and forks are designed and built to hold up to the rugged adventures you put them through.
Flip Chip
Make easy ride adjustments. Our flip chips alter bottom bracket height and head tube angle to suit rider preference, terrain, or wheel size.
SPLIT PIVOT® REAR SUSPENSION SYSTEM
Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction
PROGRESSIVE LEVERAGE RATE
The leverage rate is progressive and offers plenty of bottom out performance at the end of the stroke, promoting more confidence and control on bigger hits and a deeper feel to the travel. The beginning and mid-stroke remain relatively unchanged, providing extremely supple small bump compliance off the top for a smooth ride and consistent mid-travel support to help combat rider fatigue and maintain bike geometry. A slightly lower overall rate yields lower shock pressures making for easier and quicker initial setup
CONSISTENT BRAKING TRACTION
The Split Pivot® suspension design allows us to isolate braking forces from the rest of the system. Braking effect on suspension is minimal and consistent throughout the suspension travel
EFFICIENT PEDALING
Spearfishs Anti-squat design leads to better pedaling performance. This improved anti squat is partly the result of designing the bike to be 1x-specific and optimized around a 32-tooth chainring. The riding result is incredibly efficient pedaling without the need to over dampen the rear shock (thereby hindering small bump compliance) or necessitating the use of a lockout
METRIC SHOCK STANDARD
This shock standard brings a host of benefits: Increased stiffness in rear triangle/rear suspension frame members / Able to be fine-tuned for improved ride quality and personal preference
FLIP CHIP
Integrated into the shock link mount, the Flip Chip allows simple, quick adjustments to bottom bracket height/headtube angle to account for wheel size, tire diameter, terrain, or the riders personal preference
EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAY
EPS construction allows for precise manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability
SPEARFISH GEOMETRY
Spearfish is designed as a progressive XC bike for the rider focused on both climbing and descending with speed. It is based on the premise that precision and efficiency equal speed. While Spearfish has a renowned pedigree in ultra-endurance racing, those same attributes make it a great choice for weeknight laps at the local trail system or toeing the start line at the weekend XC race. The sub 68-degree headtube angle combines with 432 mm chainstays to provide confidence at speed without sacrificing agility. Specd with 29" wheels, Spearfish is also capable of running 27.5+ wheels. The built-in Flip Chip can be used to adjust headtube angle and bottom bracket height based on wheel and tire size, terrain, or personal preference. The low top tube and dropper post contribute to the bikes descending prowess
VERSATILE TIRE FIT
Spearfish is spec'd with 29 x 2.35" wheels and tires, but also fits: 29 x 2.2" to 2.6" / 27.5 x 2.8" to 3.0"
MODERN XC BIKE FIT
Spearfish is designed for a modern XC fit. A short stem, wide bar, and long effective top tube are used to place the rider in a position that balances between aggressive for racing and comfortable for long rides. Our frame design delivers precise steering motion due to the shorter stem; a lot of front wheel control with the wide bar; and plenty of front-center length and cockpit room thanks to the long, low top tube for fore-aft body movement when negotiating trail obstacles. Each frame size is designed around a 50 mm stem and wide bar with a long effective top tube to maintain the correct hand position relative to the pedals and saddle. There's no need to size up when selecting a frame size with the intent of running 40 to 60 mm stems-we built it in for you
TOPTUBE ACCESSORY MOUNTS
Bolt on your Salsa EXP Series Toptube Bag for secure connection and elimination of strap wear.
ACCOMMODATES FULL-SIZE BOTTLE
All Spearfish sizes accept two full-sized (26 oz) water bottle within the front triangle
INTERNAL SLEEVED CABLE ROUTING
Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile
DROPPER POST STEALTH ROUTING COMPATIBLE
Compatible with 30.9mm dropper seatposts for true trail bike performance
MOLDED FRAME PROTECTION
Protects your investment from impacts.
Click for Universal Framesheet
Click for Suspension Set Up Instructions
- Frame (Frameset):
- Spearfish Carbon V3
- Fork (Frameset):
- RockShox SID Select+, 120 mm, 44 mm offset
- Color (Frameset):
- Green
- Rear Shock (Frameset):
- Fox Float DPS Performance
- Rear Derailleur (Drivetrain):
- Shimano SLX M7100 SGS
- Cassette (Drivetrain):
- Shimano Deore M6100, 10-51t, 12-speed -OR- Ruby 11-50t, 12-speed, steel spider, HG
- Chain (Drivetrain):
- Shimano Deore M6100
- Crankset (Drivetrain):
- Shimano SLX M7130, 30t
- Shifter (Drivetrain):
- Shimano SLX M7100
- Brakes and Rotors (Drivetrain):
- Shimano Deore M6100, Shimano RT64, Center Lock (180 mm front, 160 mm rear)
- Headset (Components):
- Cane Creek 40
- Stem (Components):
- Salsa Guide Trail, 50 mm
- Handlebar (Components):
- Race Face Aeffect R 35
- Grips/Bar Tape (Components):
- Salsa File Tread Lock-on
- Seatpost (Components):
- TranzX YSI05, Shimano MT500 lever, 30 mm travel adj, SM: 125 x 409 mm, MD: 150 x 459 mm, LG/XL: 170 x 499 mm
- Saddle (Components):
- WTB Volt Medium Steel, 265 x 142
- Front Wheel (Wheels):
- Shimano SLX M7110 15 x 110 mm hub, WTB ST Light i25 29" rim
- Rear Wheel (Wheels):
- Shimano SLX M7130 -OR- WTB Frequency Comp HG 12 x 157 mm hub, WTB ST Light i25 29" rim
- Tires (Wheels):
- Maxxis Ardent Race 29 x 2.35" front, Maxxis Ikon 29 x 2.35" rear, EXO, TR
- Complete Bike Weight (Weight):
- 29 lbs 4 oz for Medium
- Fork Offset:
- 42-51mm
- Seatpost:
- ø30.9mm
- Seat Collar:
- Carbon: ø35.4mm, Aluminum: ø35.0
- Bottom Bracket:
- 73mm BSA w/ ISCG-05 Mounts (Carbon frames feature removable ISCG-05 bracket)
- Crankset (Max Ring):
- SuperBoost-157 55-57mm chainline only, 1x: 32t max
- Rear Brake (Rotor):
- 74mm post (ø160-180mm)
- Rear Spacing:
- 157 x 12 thru-axle
- Derailleur Hanger:
- FS2322
- Accessory Mounts:
- Toptube Bag Mounts
- Suspension Fork Length (Travel):
- 521-541mm (110-130mm)
- Rear Shock Size:
- 190 x 42.5mm
- Shock Mount, Fore:
- Carbon: ø8 x 40mm, Aluminum: ø8 x 30mm
- Shock Mount, Aft:
- ø8 x 12.5mm (included)
- Pivot Kit(s):
- Refer to Suspension Frame Service Instructions
- Bearings:
- 17287 (qty 4), 6800 (qty 4), 6801 (qty 2)
- Headset, Upper:
- IS41
- Headset, Lower:
- IS52
- Dropper Compatible (Routing):
- Yes, internal/stealth
- Rear Axle Size:
- ø12 x 197mm, TP=1.75, TL=20
- Tire Size Range* for 622/29 Wheels:
- 56-66mm (2.2-2.6")"
- Tire Size Range* 584/27.5 Wheels:
- 70-76mm (2.8-3.0"")"
- Tire Size Range* 559/26:
- NOT COMPATIBLE"
- Maximum Wheel/Tire Diameter**:
- ø758mm (29.8")
- Minimum Wheel/Tire Diameter***:
- ø728mm (28.5")
- F/T Bottle Mounts:
- 2