2024 Salsa Spearfish Carbon XT

Salsa
Availability:
Most in stock items ship within 1-3 business days
$6,799.00
(No reviews yet)
Weight:
45.00 LBS
Width:
58.00 (in)
Height:
10.00 (in)
Depth:
32.00 (in)
Current Stock:
Adding to cart… The item has been added

We designed Spearfish C XT to be the endurance XC bike of your dreams. Its carbon frame wastes no watts and its progressive XC geometry puts you in position to rail descents and sprint up climbs, making it a fun ride even off the racecourse. The Split Pivot suspension design delivers efficient pedaling, predictable braking, and excellent traction, backed by a Fox Float DPS Performance Elite shock with 100 mm of travel and a RockShox SID Ultimate fork good for 120 mm. Spearfishs on-bike cargo features make long days out easier, and the Shimano XT 1 x 12 componentry is a high-performance group that delivers precise shifts mile after mile.

Split Pivot Suspension System

Ride up and downhill efficiently. Our suspension system isolates pedaling forces from braking forces, so we can tune for both independently.

On-Bike Storage

Carry more on your bike and less on your body. Our frames and forks feature mounts for extra bottles, camping gear, and ride accessories.

Frame Protection

Worry less about bike damage. Our frames and forks are designed and built to hold up to the rugged adventures you put them through.

Flip Chip

Make easy ride adjustments. Our flip chips alter bottom bracket height and head tube angle to suit rider preference, terrain, or wheel size.

SPLIT PIVOT® REAR SUSPENSION SYSTEM

Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction

PROGRESSIVE LEVERAGE RATE

The leverage rate is progressive and offers plenty of bottom out performance at the end of the stroke, promoting more confidence and control on bigger hits and a deeper feel to the travel. The beginning and mid-stroke remain relatively unchanged, providing extremely supple small bump compliance off the top for a smooth ride and consistent mid-travel support to help combat rider fatigue and maintain bike geometry. A slightly lower overall rate yields lower shock pressures making for easier and quicker initial setup

CONSISTENT BRAKING TRACTION

The Split Pivot® suspension design allows us to isolate braking forces from the rest of the system. Braking effect on suspension is minimal and consistent throughout the suspension travel

EFFICIENT PEDALING

Spearfishs Anti-squat design leads to better pedaling performance. This improved anti squat is partly the result of designing the bike to be 1x-specific and optimized around a 32-tooth chainring. The riding result is incredibly efficient pedaling without the need to over dampen the rear shock (thereby hindering small bump compliance) or necessitating the use of a lockout

METRIC SHOCK STANDARD

This shock standard brings a host of benefits: Increased stiffness in rear triangle/rear suspension frame members / Able to be fine-tuned for improved ride quality and personal preference

FLIP CHIP

Integrated into the shock link mount, the Flip Chip allows simple, quick adjustments to bottom bracket height/headtube angle to account for wheel size, tire diameter, terrain, or the riders personal preference

EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAY

EPS construction allows for precise manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability

SPEARFISH GEOMETRY

Spearfish is designed as a progressive XC bike for the rider focused on both climbing and descending with speed. It is based on the premise that precision and efficiency equal speed. While Spearfish has a renowned pedigree in ultra-endurance racing, those same attributes make it a great choice for weeknight laps at the local trail system or toeing the start line at the weekend XC race. The sub 68-degree headtube angle combines with 432 mm chainstays to provide confidence at speed without sacrificing agility. Specd with 29" wheels, Spearfish is also capable of running 27.5+ wheels. The built-in Flip Chip can be used to adjust headtube angle and bottom bracket height based on wheel and tire size, terrain, or personal preference. The low top tube and dropper post contribute to the bikes descending prowess

VERSATILE TIRE FIT

Spearfish is spec'd with 29 x 2.35" wheels and tires, but also fits: 29 x 2.2" to 2.6" / 27.5 x 2.8" to 3.0"

MODERN XC BIKE FIT

Spearfish is designed for a modern XC fit. A short stem, wide bar, and long effective top tube are used to place the rider in a position that balances between aggressive for racing and comfortable for long rides. Our frame design delivers precise steering motion due to the shorter stem; a lot of front wheel control with the wide bar; and plenty of front-center length and cockpit room thanks to the long, low top tube for fore-aft body movement when negotiating trail obstacles. Each frame size is designed around a 50 mm stem and wide bar with a long effective top tube to maintain the correct hand position relative to the pedals and saddle. There's no need to size up when selecting a frame size with the intent of running 40 to 60 mm stems-we built it in for you

TOPTUBE ACCESSORY MOUNTS

Bolt on your Salsa EXP Series Toptube Bag for secure connection and elimination of strap wear.

ACCOMMODATES FULL-SIZE BOTTLE

All Spearfish sizes accept two full-sized (26 oz) water bottle within the front triangle

INTERNAL SLEEVED CABLE ROUTING

Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile

DROPPER POST STEALTH ROUTING COMPATIBLE

Compatible with 30.9mm dropper seatposts for true trail bike performance

MOLDED FRAME PROTECTION

Protects your investment from impacts.

Click for Geometry

Click for Owners Manual

Click for Universal Framesheet

Click for Suspension Set Up Instructions

Click for Frame Guide

Click for Suspension Frame main Pivot Instructions

Click for Axle Pivot Hanger Instructions

Frame (Frameset):
Spearfish Carbon V3
Fork (Frameset):
RockShox SID Ultimate, 120 mm, 44 mm offset
Color (Frameset):
Pink
Rear Shock (Frameset):
Fox Float DPS Performance Elite
Rear Derailleur (Drivetrain):
Shimano XT M8100 SGS
Cassette (Drivetrain):
Shimano SLX M7100, 10-51t, 12-speed
Chain (Drivetrain):
Shimano SLX M7100
Crankset (Drivetrain):
Shimano XT M8130, 30t
Shifter (Drivetrain):
Shimano XT M8100
Brakes and Rotors (Drivetrain):
Shimano SLX M7100, Shimano RT64, Center Lock (180 mm front, 160 mm rear)
Headset (Components):
Cane Creek 40
Stem (Components):
Salsa Guide Trail, 50 mm
Handlebar (Components):
Race Face Turbine R 35
Grips/Bar Tape (Components):
Salsa File Tread Lock-on
Seatpost (Components):
TranzX YSI05, Shimano MT500 lever, 30 mm travel adj, SM: 125 x 409 mm, MD: 150 x 459 mm, LG/XL: 170 x 499 mm
Saddle (Components):
WTB Volt Medium Steel SL, 265 x 142
Front Wheel (Wheels):
Reynolds Carbon C 309, 15 x 110 mm, 29"
Rear Wheel (Wheels):
Reynolds Carbon C 309, 12 x 157 mm, 29"
Tires (Wheels):
Maxxis Ardent Race 29 x 2.35" front, Maxxis Ikon 29 x 2.35" rear, EXO, TR
Complete Bike Weight (Weight):
28 lbs 0 oz for Medium
Fork Offset:
42-51mm
Seatpost:
ø30.9mm
Seat Collar:
Carbon: ø35.4mm, Aluminum: ø35.0
Bottom Bracket:
73mm BSA w/ ISCG-05 Mounts (Carbon frames feature removable ISCG-05 bracket)
Crankset (Max Ring):
SuperBoost-157 55-57mm chainline only, 1x: 32t max
Rear Brake (Rotor):
74mm post (ø160-180mm)
Rear Spacing:
157 x 12 thru-axle
Derailleur Hanger:
FS2322
Accessory Mounts:
Toptube Bag Mounts
Suspension Fork Length (Travel):
521-541mm (110-130mm)
Rear Shock Size:
190 x 42.5mm
Shock Mount, Fore:
Carbon: ø8 x 40mm, Aluminum: ø8 x 30mm
Shock Mount, Aft:
ø8 x 12.5mm (included)
Pivot Kit(s):
Refer to Suspension Frame Service Instructions
Bearings:
17287 (qty 4), 6800 (qty 4), 6801 (qty 2)
Headset, Upper:
IS41
Headset, Lower:
IS52
Dropper Compatible (Routing):
Yes, internal/stealth
Rear Axle Size:
ø12 x 197mm, TP=1.75, TL=20
Tire Size Range* for 622/29 Wheels:
56-66mm (2.2-2.6")"
Tire Size Range* 584/27.5 Wheels:
70-76mm (2.8-3.0"")"
Tire Size Range* 559/26:
NOT COMPATIBLE"
Maximum Wheel/Tire Diameter**:
ø758mm (29.8")
Minimum Wheel/Tire Diameter***:
ø728mm (28.5")
F/T Bottle Mounts:
2