2024 Scott Strike eRIDE 930 Bike Black

Key Features

• Strike eRIDE Alloy Frame
• Marzocchi Z2 Air 140mm
• X-Fusion Nude, 140mm, TwinLoc
• SRAM SX Eagle 12 Speed
• Bosch CX, PowerTube up to 1125Wh
• Shimano 4 Piston Disc Brakes
• Maxxis Rekon Tires
• Syncros Dropper Post and Parts
• Bosch Light Cable F&R

Specifications

Looking to head off road? The Strike eRIDE 930 is the definition of comfort for a full suspension e-MTB. State of the art integration, high-end components and a quality Bosch drive unit combine to give you a solid choice for any outing. Rack and fender available.

BOSCH POWER TUBE

Thanks to their range, long service life, intelligent battery management system and easy handling, Bosch Power Tube lithium-ion batteries are among the most modern on the market. All those decades of Bosch experience has paid off! PowerTube: 400Wh, 500Wh, 625Wh, 750Wh

SCOTT RANGE EXTENDER- MTB

SCOTT eRIDE engineering team has developed a specific mount which is fixed on the bottle cage slots. A standard 500Wh Bosch battery can be added on the Range Extender mount. This result in a total of 1125Wh. To recharge, just one charger is needed. The Bosch digital display will take into consideration both batteries. Focus on your journey and not on your battery level! Compatible with the Genius/Strike/Aspect/Axis eRIDE.

SCOTT IMPACT DAMPER

The bottom bracket area is exposed to flying rocks or other potential impacts, therefore we have developed our own specific skid plate, the "Impact Damper". It is reinforced to handle impacts, is covered with a rubber layer to reduce noise and is ventilated to improve drive unit airflow.

Light ready

In order to mount a front or rear light, we have already routed the cables in the frame, and there is no need for an extra battery - the power comes straight from the drive unit battery.

TwinLoc Suspension System

With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters.

TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible.

These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150mm travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. 

One Frame, Two Wheel Sizes

With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" or from 24" to 26" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. 

ADVANCED DESIGN

With this new E-Bike generation, the design has been pushed further than ever before. More than a battery integrated into the frame, we see the bike as a system where every part must be taken into consideration. Therefore, to improve the integration, we have worked a lot on the line continuity but also on the design balance from the headtube to the dropouts. Enjoy a bike with a unique character!

Rack & fenders

Feel free to install a rack and the corresponding fende set. The frame has dedicated fixation pointfor a clean and reliable solution. Racks and fenders available on the Apage of the website

BOSCH PERFORMANCE CX GEN 4 DRIVE UNIT

The new Performance CX generation is now 48% smaller and 25% lighter compare to the previous generation. More compact but no less powerful, the new Bosch Performance CX Generation 4 comes with a maximum power output of 75Nm and 340%. Choose between 5 assist modes or opt for the comfort of the eMTB mode which automatically adapts the assistance like an automatic gearbox does in a car.

Click for Geometry

Click for Size Chart

Click for Scott General Manual

Click for MTB Pedelec Manual