2026 Niner RIP 9 RDO V3.1 Fox Factory - Frame
NinerRoll in peace while the RIP 9 RDO's 140mm of travel eats up every bit of trail you feed it.

Roll in peace

You want to tear it up? RIP 9 RDO is an all-mountain monster. 140mm sweet spot travel, CVA suspension, and adjustable geo. From shuttle runs and bike parks to backcountry adventures, RIP will consume it all with a shit-eating grin.
Send the drop

You want to play? Bike parks and cycle centers are popping up everywhere, from Shepherd Mountain in Missouri to Forest of Dean in the UK, and RIP 9 RDO can't get enough. The Niner RDO carbon frame is light weight and climbs with ease, yet its stiffness and strength absolutely crushes the descent. The rib cage struts decrease bottom bracket deflection. The wide, flat top and down tubes absorb impacts and vibrations while resisting twisting under load. The beefy rear triangle keeps the entire bike stiffer front to back.
RIP can handle it, Can you?

You want two bikes in one? Flip chip takes care of that. The high mode geo is for everyday trail riding, low mode is ready to rowdy. Launch uphill and over technical terrain then turn around and point it down. Drop in with confidence thanks to the long reach, low BB, and slack head tube angle. In high that angle is 66, go low to slack out the head tube angle a full degree to 65, also lowering the bottom bracket 7mm.
9 Things you need to know about RIP 9 RDO

- 140mm of CVA suspension with 150mm fork travel
- Clearance for 29 x 2.6" tires
- Flip chip geo in high: 66 head angle, 75.8 seat angle
- Flip chip geo in low: 65head angle, 75.2 seat angle, BB drops 7mm
- Rib Cage main triangle for precise handling
- Enduro Max Black Oxide pivot bearings
- UDH compatible
- Refined suspension curve from CVA
- Lifetime warranty
CVA suspension

Supple yet stable, and the confidence to drop into gnarly lines, knowing you'll get consistency and control from top to bottom
RDO carbon fiber

Niner's premium Race Day Optimized carbon fiber means more strength, higher stiffness, and less weight.
Full Sleeve cable guides

We built end-to-end cable guides through the frame for easy installation and maintenance.
Enduro Max Black Oxide pivot bearings

Built for life these are the smoothest, most durable pivot bearings in the industry.
Protection where you need it

Factory installed, integrated frame protection to keep your ride safe from harm, even when you're in over your head.
Lifetime warranty

Ride, race, get rowdy. We'll do our damnedest to keep you riding.
- Available Frame Sizes:
- SM, MD, LG, XL
- Available Colors:
- Agave Teal/Bronze- Hemp Grey/Black
- Frame:
- NINER RDO CARBON FIBER, 140MM TRAVEL, GEO FLIP CHIP, RIB CAGE CONSTRUCTION, FULL SLEEVE CABLE ROUTING, ENDURO MAX BLACK OXIDE PIVOT BEARINGS, UDH
- Shock:
- FOX FLOAT X FACTORY EVOL 2 POSITION W/ ADJUST, KASHIMA COAT
- Frame fittings:
- All sizes have 1 bottle cage mount inside front triangle
- Rear suspension travel:
- 140mm
- Maximum front suspension:
- 150mm (44mm offset)
- Shock size:
- 210 x 55, metric
- Shock mounting hardware:
- Upper - M8 x 30mm, Lower - M8 x 25mm
- Suggested shock sag:
- 30% - Moves the O-ringnbsp-
- Seatpost size:
- 30.9
- Seat collar size:
- 34.9
- Cable routing:
- Internal, Full Sleeve guides- internal dropper post routing, Di2 and FOX Live Valve compatible
- Front derailleur:
- n/a
- Headset size:
- 1.125 X 1.5" TAPERED ZERO STACK HEADSET INCLUDED, 44MM UPPER, 56MM LOWER, CANE CREEK DESCRIPTION: ZS44/28.6 ZS56/40"
- Pivot bearing specs:
- Sealed Cartridge Enduro Max Black Oxide Bearingsnbsp-
- Chainring compatibility:
- Compatible with standard 1x systems
- Maximum chainring size:
- 34T with 52mm chainline, 168mm minimum Q factor
- Q-Factor:
- 168mm
- ISCG compatibility:
- ISCG05
- Bottom bracket type:
- 73mm threadednbsp-
- Brake mount type:
- Post mount
- Maximum rear rotor size:
- 180mm
- Rear wheel spacing:
- 148x12mm
- Rear wheel through-axle spec:
- M12x1.75Px182L
- Front wheel axle spacing:
- 110x15mm
- Max tire size:
- 29x2.6 (tire sizes vary by brand, some may not fit)"