Click for Geometry
2024 Marin Rift Zone E1 - Gloss Tan/Black
Marin
$4,999.00
(No reviews yet)
Write a Review
Marin
2024 Marin Rift Zone E1 - Gloss Tan/Black
MOUNTAIN BIKING WITH A BOOST
THE JACK-OF-ALL-TRADES MTB, ELECTRIFIED
MAXIMIZING FUNThe all-new Rift Zone E is the result of us taking our award-winning trail 29" platform and engineering it for electrification. Rear wheel travel is increased by 10mm, and the chainstays are 10mm longer in this application, and Shimanos proven Steps platforms help propel the rider up the trail
SERIES 4 ALUMINUM FRAME
Rift Zone E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.
MULTITRAC SUSPENSION
The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system, with 140mm of suspension for the best on-trail experience.
SHIMANO STEPS
Shimanos STEPS system is both powerful and lightweight, with the mid-drive motor down low to help ensure that the Rift Zone E performs like the analog version, but with a 250W boost. Three levels of power give riders options to balance electric power, speed and range. Electric assist up to 20mph in the US, 25km/h in Europe.
Key upgrades from the Rift Zone E
630Wh BatteryREAR SHOCK SETUP
Recommended Sag = 30%/19.5mm
Step 1: Set correct pressure in rear shock.
Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bikes recommended sag in millimeters repeat process.
Step 5: Adjust rebound setting to ensure proper control.
FORK SETUP
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacturer.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
RockShox Deluxe Select+
| LBS | KG | PSI |
|---|---|---|
| 120 | 54 | 135 |
| 130 | 59 | 150 |
| 140 | 64 | 165 |
| 150 | 68 | 180 |
| 160 | 73 | 195 |
| 170 | 77 | 210 |
| 180 | 82 | 225 |
| 190 | 86 | 240 |
| 200 | 91 | 255 |
| 210 | 95 | 270 |
| 220 | 100 | 280 |
| 230 | 104 | 289 |
| 240 | 109 | 297 |
| 250 | 113 | 304 |
| 260 | 118 | 310 |
| 270 | 122 | 315 |
- FRAME:
- All New Series 4 Alloy Frame, 140mm MultiTrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
- SPOKES:
- 14g Black Stainless Steel
- TIRES:
- Vee Tire Co Attack HPL, 29x2.5", Top 40 Tubeless Compatible, Override E-Specific Casing
- DERAILLEUR REAR:
- Shimano Deore, Direct Attachment, 11-Speed, SGS
- SHIFT LEVER:
- Shimano Deore, 11-Speed, I-Spec EV
- CRANKSET:
- Shimano EM600, 160mm Length, 38t Chainring
- CHAIN:
- KMC X-10E, Silver
- CASSETTE:
- SunRace 11-Speed, 11-51T
- BRAKES REAR:
- Tektro Slate EVO, 4-Piston Hydraulic Disc, Resin Pads, 203mm Rotor, w/ Bolt on Speed Sensor
- BRAKE LEVERS:
- Tektro Slate EVO Hydraulic Lever, I-Spec EV Compatible
- HANDLEBAR:
- Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5° Up, 9° Back
- STEM:
- Marin 3D Forged Alloy, 35mm
- GRIPS:
- Marin Grizzly Lock On
- HEADSET:
- FSA No 57E, Sealed Cartridge Bearings, 1 1/8" x 1 1/2";SEATPOST=TranzX, YSP23JL, 1x Remote, Size S 150mm Travel, Size M and L 170mm Travel, Size XL 200mm Travel, 30.9mm"
- SADDLE:
- Marin eMTB Saddle
- PEDALS:
- Marin MTB Plastic
- EXTRAS:
- Shimano Battery Charger EC-E6002, 2A; Shimano CS-EN800 Chainguide, Cap Cush Core Pro Tire Inserts Marin Tire Sealant 300ml, Squeeze Top with Valve Core Removal Tool
- FORK:
- RockShock Pike Base 29", Motion Control Damper, 140mm Travel, Maxle Stealth Axle, 42mm Offset
- RIMS:
- Marin Aluminum Double Wall, 29" Diameter, 29mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible
- BRAKE FRONT:
- Tektro Slate EVO, 4-Piston Hydraulic Disc, Resin Pads, 203mm Rotor
- SHOCK:
- RockShox Deluxe Select+, Compression and Rebound Adjustment, 210x55, 25xM8 Lower and Upper Mount
- MOTOR:
- Shimano Steps EP6 Drive Unit, 250W, 85Nm, 20MPH Top Assisted Speed
- BATTERY:
- Shimano BT-EN806, Internal 630Wh
- DISPLAY:
- Shimano SC-E600
- RANGE, CHARGING TIME:
- 19-50 miles (Based on Rider Weight, Terrain, Climate and Level of Assist Used), 11 Hours (estimated, under ideal conditions)
- HUBS REAR:
- Shimano HB-TC500, 148x12mm, Centerlock, Standard Freehub Body
- HUBS FRONT:
- Shimano FH-TC500, 110x15mm, Centerlock, 32H
